Latest News
Home > News Center > Company News

Introduction to Induction Furnace
2024-02-21 08:45:43

An electric furnace that utilizes the induction heating effect of materials to heat or melt them. The basic component of an induction furnace is an induction coil wound with copper tubes. An alternating voltage is applied at both ends of the induction coil to generate an alternating electromagnetic field. Conductive materials are placed in the induction coil, and due to electromagnetic induction, eddy currents are generated in the materials. Under the action of resistance, electrical energy is converted into thermal energy to heat the materials; So, it can also be considered that an induction furnace is a direct heating resistance furnace.

The characteristic of an induction furnace is that the electric heating power (current distribution) transformed in the heated material is very uneven, with the largest surface and the smallest center, known as the skin effect. In order to improve the electric heating efficiency of induction heating, the power supply frequency should be appropriate. Small melting furnaces or surface heating of materials should use high-frequency electricity, while large melting furnaces or deep penetration heating of materials should use medium frequency or power frequency electricity. Induction coils are loads with a considerable amount of inductance, and their power factor is generally very low. In order to improve power factor, induction coils are generally connected in parallel with intermediate or high-frequency capacitors, known as resonant capacitors. The gap between the induction coil and the material should be small. The induction coil should be made of square copper tube, with water cooling inside the tube. The inter turn gap of the induction coil should be as small as possible, and the insulation should be good. Induction heating device is mainly used for heating and casting steel, copper, aluminum, zinc, etc. It has fast heating, low burning loss, high mechanization and automation, and is suitable for configuration on automatic operation lines.

Related tags:

Comment

(0)
*Captcha:
Contact Information
Jinzhou TongHui Vacuum Metallurgical Technology Co., Ltd.

Add: No. 461-1, Maoshan Village, Zhongtun Township, 

Guta District, Jinzhou City, Liaoning Province


Tel: +86-15084179090

E-mail: 1045072944@qq.com

Website: en.jzthzk.cn


FOLLOW US

Copyright  ©  2024 Jinzhou TongHui Vacuum Metallurgical Technology Co., Ltd.